Emergence and Benefits of PoE (Power over Ethernet) Lighting
- Aug 2, 2022 2:50 am GMT
What is PoE (Power over Ethernet)?
Power over Ethernet (PoE) is technology that passes electric power over twisted-pair ethernet cable to powered devices (PD), such as wireless access points, light fixtures, IP cameras, and VoIP phones in addition to the data that cable usually carries. It enables one RJ45 cable to provide both data connection and electric power to PDs instead of having a separate cable for each.
PoE lighting uses Power over Ethernet technology to connect, monitor, and control LED light fixtures used in smart building solutions. Smart PoE lighting reduces installation and operating costs by more than half and helps building owners meet wellness and sustainability goals.
Using PoE to power low-voltage DC-powered LED lighting has many benefits over both traditional lighting options (incandescent, fluorescent and CFL, and halogen) and newer AC-powered LED options. Using low-voltage LED lighting alone can offer a dramatic reduction in energy required per lumen compared to incandescent and halogen equivalents. But using PoE to power and connect lighting has several significant advantages. It can:
- Reduce up-front construction costs and time to completion when used for cabling, installation, and configuration. There is also a dramatic reduction in carbon footprint, since no conduit or high-voltage copper wiring need to be installed.
- Lower capital expenditures, labor, and materials costs related to construction and maintenance.
- Allow for greater flexibility in design and placement.
- Enable the optimization and quantification of energy consumption by using the building’s network as a sensor and interconnecting shades. This saves money and reduces carbon footprint.
- Require less energy, run cooler, and be a smaller form factor since no AC/DC transforming or transformer is required.
- Power, monitor, and control LED lighting, IoT devices, and centralized and automated environmental controls.
- Improve lighting through automation. Personalized environments can attract tenants and increase revenue per square foot.
How does PoE LED lighting differ from AC-powered LED lighting?
There are several key differences between DC-based PoE lighting and AC-powered LED lighting; LED lights need DC power to operate, so AC-powered LED fixtures need a transformer to convert their power source to DC. This can result in a 20 percent loss in power. In addition, the transformer itself can be bulky, and it emits heat because of the conversion. AC power also requires heavier gauge wire, a conduit, and an electrician to install. With PoE, common Ethernet cabling is used. And because of the low power, it can be safely installed without an electrician. This reduces installation costs, speeds time to completion, and allows for more flexible fixture placement. PoE lighting can be readily paired with sensors, shades, and HVAC controllers without requiring a separate data cable.
Benefits of PoE
PoE technology offers several benefits:
- Delivery of data and power over a standard Ethernet cable eliminates the need for AC/DC power supplies and outlets to give power to PD equipment. That lowers the costs of adding or installing compatible PD equipment since you don’t need an electrician to install power if there isn’t any where you want to place your new PDs. Additionally, regular Ethernet cable is rather inexpensive and is often already installed in the location.
- With PoE technology there are fewer points of failure. Connect your PoE switch or PoE injector to an uninterruptible power supply (UPS) and your PoE powered devices are guaranteed a constant power delivery, which is important for mission critical PoE edge devices.
- PoE installations utilize managed PoE switches, offering the ability to remotely restart connected PoE devices. That can be done either manually, automatically or based on a schedule. Modern PoE switches are equipped with watchdog functionality (i.e., Powered Device Manager [PDM]) that cuts power to offline devices and then resupplies it so they reboot. This function helps to greatly reduce the downtime of your connected devices.
Using Power over Ethernet provides several advantages during installation:
Time & Cost Savings
PoE can reduce the time and expense of having electrical power cabling installed. Network cables do not require a qualified electrician to install. Reduction of power outlets required per installed device saves money. It also reduces energy costs by allowing for centralized control over lighting, window shades, and heating and cooling.
Without being tethered to electrical outlets, devices such as monitors, security cameras, and wireless access points can be positioned in ideal locations and be easily repositioned if moved.
Power delivery using PoE is designed to intelligently protect network equipment from overload, underpowering, and incorrect installation. It also eliminates the danger of working with or around dangerous high-voltage power sources.
PoE power comes from a central and universally compatible source and not from a collection of distributed wall adapters. It can be backed up by an uninterruptible power supply (UPS), allowing for continuous operation even during power failures. PoE also allows for devices to be easily disabled or reset from a centralized controller.
Having power available on the network means that the installation and distribution of network connections are simple and effective.
The 4 “C” s of PoE…
- Copper; 60% less copper (lower AWG wire)
- Conduit; 100% less steel (no conduit)
- Change Orders; 100% flexibility (software change orders, open standards)
- Conversion Costs; 30% lower operating cost (no AC-to-DC conversion in every fixture
No discussions yet. Start a discussion below.
Get Published - Build a Following
The Energy Central Power Industry Network is based on one core idea - power industry professionals helping each other and advancing the industry by sharing and learning from each other.
If you have an experience or insight to share or have learned something from a conference or seminar, your peers and colleagues on Energy Central want to hear about it. It's also easy to share a link to an article you've liked or an industry resource that you think would be helpful.